"TR6143-bas"의 두 판 사이의 차이
(새 문서: 10 ! <pre> 20 ! 2020-01-08 30 ! 기능 및 범위: V3,V4,V5,V6 = 320mV 3.2V 32V 110V(default) 40 ! I-1, I0, I1, I2, I3, I4 = 32uA 320uA 3.2mA 32mA 320mA...) |
|||
| 1번째 줄: | 1번째 줄: | ||
| − | 10 ! <pre> | + | 10 ! [[Advantest TR6143]] <pre> |
20 ! 2020-01-08 | 20 ! 2020-01-08 | ||
30 ! 기능 및 범위: V3,V4,V5,V6 = 320mV 3.2V 32V 110V(default) | 30 ! 기능 및 범위: V3,V4,V5,V6 = 320mV 3.2V 32V 110V(default) | ||
2020년 1월 9일 (목) 11:10 판
10 ! Advantest TR6143
20 ! 2020-01-08
30 ! 기능 및 범위: V3,V4,V5,V6 = 320mV 3.2V 32V 110V(default)
40 ! I-1, I0, I1, I2, I3, I4 = 32uA 320uA 3.2mA 32mA 320mA 2A
50 ! 0.01mV~110V
60 ! 입력숫자: D + dddd unit, 예 D + 0500.0 MA
70 ! 출력 on/off E, H
80 ! response mode slow/fast RP0, PR1
90 ! integration time 10ms, 1PLC, 10PLC, 100PLC = IT2, IT3, IT4, IT5
100 OPTION BASE 1
110 GOSUB Battery_select
120 GOSUB Fileopen
130 GOSUB Inst_open
140 GOSUB Stimulus_select
150 GOSUB Measure
160 GOSUB Inst_close
170 GOSUB Fileclose
180 STOP
190 Measure: !
200 INTEGER Count,I
210 DIM Cmd$[25],A1$[14],A2$[14],Test$[1]
220 OUTPUT @File;"No.,Time[m],Volt[V],Curr[A]"
230 GOSUB Chart_var
240 GOSUB Init_chart
250 Wait=.2 !계측기 세팅을 한 후, 첫 측정에서 측정값이 0이 나오는 현상 때문에 잠시 대기 시간
260 T0=TIMEDATE
270 Count=0
280 FOR I=1 TO 5 !배터리 충방전실험을 5회 실시
290 GOSUB Cycle
300 NEXT I
310 RETURN
320 Cycle: !
330 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
340 !충전. 정전류, 전압제한(전압을 읽는다.)
350 !전류 전압을 -로 표기한다.
360 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
370 Test$="C"
380 Cmd$="I4" !2A range
390 Cmd$=Cmd$&" D "&VAL$(Ic)&"A" !D1.0A
400 Cmd$=Cmd$&" D "&VAL$(Vc)&"V" !D4.2V
410 OUTPUT @Src;Cmd$ !"I4 D1A D4.2V"
420 OUTPUT @Src;"E" !Operate ON
430 WAIT Wait
440 Pre_v=0
450 LOOP
460 Time=(TIMEDATE-T0)/60
470 GOSUB Reading
480 Volt=Data
490 Curr=Ic
500 IF Data>Pre_v THEN !측정값이 직전값보다 크면
510 GOSUB Data_process
520 END IF
530 EXIT IF Volt>=Vc !측정 전압이 충전최고 전압에 도달하면
540 END LOOP
550 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
560 !충전, 충전 최고전압에 도달하면. 정전압, 전류제한(전류를 읽는다.)
570 !전류 전압을 -로 표기한다.
580 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
590 Test$="C"
600 Cmd$="V5" !32V range
610 Cmd$=Cmd$&" D "&VAL$(Vc)&"V" !D4.2V
620 Cmd$=Cmd$&" D "&VAL$(Ic)&"A" !D1.0A
630 OUTPUT @Src;Cmd$ !"V5 D 4.2V D 1.0A"
640 OUTPUT @Src;"E" !Operate ON
650 WAIT Wait
660 Pre_v=Curr
670 LOOP
680 Time=(TIMEDATE-T0)/60
690 GOSUB Reading !충전전압에 도달되어, 흐르는 전류를 측정한다.
700 Curr=Data
710 Volt=Vc
720 IF Data<Pre_v THEN !측정값이 직전값보다 작으면
730 GOSUB Data_process
740 END IF
750 EXIT IF Curr<Ic_end !현재 전류가 종료전류에 도달하면
760 END LOOP
770 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
780 !방전
790 !전류 전압을 +로 표기한다.
800 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
810 !charge volt limit=Vc
820 Test$="D"
830 Cmd$="I4" !2A range
840 Cmd$=Cmd$&" D "&VAL$(-Id)&"A" !D-1.0A
850 Cmd$=Cmd$&" D "&VAL$(Vc)&"V" !D4.2V
860 OUTPUT @Src;Cmd$ !"I4 D1A D4.2V"
870 OUTPUT @Src;"E" !Operate ON
880 WAIT Wait
890 Pre_v=Vc
900 LOOP
910 Time=(TIMEDATE-T0)/60
920 GOSUB Reading !일정 전류 방전 , 전압이 측정된다.
930 Volt=Data
940 Curr=Id
950 IF Data<Pre_v THEN !측정값이 직전값보다 작으면
960 GOSUB Data_process
970 END IF
980 EXIT IF Volt<Vd !현재 전압이 충전전압에 도달하면
990 END LOOP
1000 RETURN
1010 Data_process: !
1020 Count=Count+1
1030 Y1=(Volt/Vc)*100 !전압 [%]
1040 Y2=(Curr/Ic)*100 !전류 [%]
1050 IF Test$="C" THEN
1060 Y(1)=-Y1
1070 Y(2)=-Y2
1080 ELSE !"D"
1090 Y(1)=Y1
1100 Y(2)=Y2
1110 END IF
1120 CONTROL @Strip;SET("POINT LOCATION":Time,"VALUES":Y(*))
1130 PRINT "Count=";Count;", T=";PROUND(Time,-4);"m, V=";Volt;"V, I=";Curr;"A"
1140 OUTPUT @File;Count,PROUND(Time,-4),Volt,Curr
1150 Pre_v=Data
1160 RETURN
1170 Reading: !
1180 ! 전압을 측정하면 나타나는 데이터 포맷
1190 ! 12345678901234
1200 !"DV +03.857E+0" 원래
1210 !" DV +03.857E+0" 앞에 공백이 하나 추가되어 나온 적이 있다.
1220 ! 전압를 측정하면 나타나는 데이터 포맷
1230 ! 12345678901234
1240 !"DI +0.6310E+0" 원래
1250 ENTER @Src;A1$
1260 A2$=TRIM$(A1$) !앞뒤 공백 모두 없앤다
1270 Data=VAL(A2$[3,13])
1280 Data=PROUND(Data,-3) !특히 mA단위까지만 나오도록, 0.1mA까지 측정되면 너무 많은 데이터가 획득되므로
1290 RETURN
1300 Fileopen: !
1310 DIM Filename$[20],Dhms$[8]
1320 Time$=TIME$(TIMEDATE) !하루가 늦게 계산되므로 하루 추가 +24*3600
1330 Date$=DATE$(TIMEDATE)
1340 Dhms$=Date$[1;2]&Time$[1;2]&Time$[4;2]&Time$[7;2]
1350 Filename$=Dhms$&".txt"
1360 CREATE Filename$,1
1370 ASSIGN @File TO Filename$;FORMAT ON
1380 RETURN
1390 Fileclose:!
1400 ASSIGN @File TO *
1410 RETURN
1420 Battery_select: !
1430 DIM Msg$[25]
1440 INTEGER Size,Length,Btn,Battery_no
1450 Size=3
1460 Length=4
1470 ALLOCATE Battery$(Size)[Length]
1480 Battery$(1)="Li"
1490 Battery$(2)="NiCd"
1500 Battery$(3)="EDLC"
1510 Msg$="배터리 종류"
1520 DIALOG "LIST",Msg$,Btn;SET("ITEMS":Battery$(*),"COLUMNS":Length,"ROWS":Size),RETURN("SELECTION":Battery_no)
1530 Battery_no=Battery_no+1
1540 RETURN
1550 Inst_close:!
1560 OUTPUT @Src;"H" !Operate OFF
1570 RETURN
1580 Inst_open: !
1590 ASSIGN @Src TO 714 !advantest TR6143
1600 RETURN
1610 Stimulus_select: !
1620 SELECT Battery$(Battery_no)
1630 CASE "Li"
1640 Vc=4.2 !4.2V 충전전압
1650 Vd=3.2 !3.2V 방전종료전압
1660 Ic=2 !100mA 충전전류
1670 Ic_end=.1 !충전 종료 전류
1680 Id=2 !100mA 방전전류
1690 CASE "NiCd"
1700 Vc=1.5 !1.5V 충전전압
1710 Vd=.9 !0.9V 방전종료전압
1720 Ic=.001 !100mA 충전전류
1730 Ic_end=.0001 !충전 종료 전류
1740 Id=.1 !100mA 방전전류
1750 CASE ""
1760 Msg$="충전전류[A], 방전전류[A], 충전종료전류[A], "
1770 END SELECT
1780 !GOSUB Dialog_string3
1790 RETURN
1800 Chart_var: !
1810 X_origin=0 !time=0
1820 X_range=2*60 !24 hours
1830 X_axis_label$="Elapsed Time [Min]"
1840 Y_origin=-110
1850 Y_range=220
1860 Y_axis_label$="Volt & Current [%]"
1870 RETURN
1880 Init_chart: !
1890 DIM X_axis_label$[25],Y_axis_label$[25]
1900 INTEGER Trace_num
1910 INTEGER Screen_dims(1:2),Gwindow_dims(1:4)
1920 REAL Y(1:2) !Y(1) Volt, Y(2) Current
1930 GESCAPE CRT,36;Screen_dims(*) ! Get screen width and height.
1940 !
1950 ! Set the dimensions of the graphics window using GESCAPE 33 so
1960 ! that it is centered on the screen.
1970 !
1980 Gwindow_dims(1)=Screen_dims(1)*.25 ! X of upper left.
1990 Gwindow_dims(2)=Screen_dims(2)*.2 ! Y of upper left.
2000 Gwindow_dims(3)=Screen_dims(1)*.7 ! Width.
2010 Gwindow_dims(4)=Screen_dims(2)*.6 ! Height.
2020 GESCAPE CRT,33;Gwindow_dims(*) ! Set graphics window geometry.
2030 !
2040 GESCAPE CRT,35 ! Move the graphics window to the top.
2050 !
2060 ! Create a stripchart. Make it invisible until all changes are made.
2070 !
2080 ASSIGN @Strip TO WIDGET "STRIPCHART";SET("VISIBLE":0)
2090 !
2100 ! Set the overall attributes.
2110 !
2120 CONTROL @Strip;SET("TITLE":"Data Logger")
2130 CONTROL @Strip;SET("MINIMUM SCROLL":2)
2140 CONTROL @Strip;SET("MOVABLE":0)
2150 CONTROL @Strip;SET("MAXIMIZABLE":0)
2160 CONTROL @Strip;SET("X":0,"Y":0)
2170 !
2180 ! Size the stripchart to exactly fill the graphics window.
2190 !
2200 Vert_borders=26
2210 Horiz_borders=8
2220 Height=Gwindow_dims(4)-Vert_borders
2230 Width=Gwindow_dims(3)-Horiz_borders
2240 CONTROL @Strip;SET("WIDTH":Width,"HEIGHT":Height)
2250 !
2260 CONTROL @Strip;SET("CURRENT AXIS":"X")
2270 CONTROL @Strip;SET("ORIGIN":X_origin,"RANGE":X_range)
2280 CONTROL @Strip;SET("AXIS LABEL":X_axis_label$)
2290 !CONTROL @Strip;SET("DIGITS":5)
2300 !
2310 CONTROL @Strip;SET("CURRENT AXIS":"Y")
2320 CONTROL @Strip;SET("ORIGIN":Y_origin,"RANGE":Y_range)
2330 CONTROL @Strip;SET("AXIS LABEL":Y_axis_label$)
2340 !
2350 CONTROL @Strip;SET("VISIBLE":1) ! Show the stripchart.
2360 !
2370 RETURN
2380 END